Fall - Through Protection Systems

Overview

Retro-Grate™  is the custom made fall-through protection system designed to fit most openings, regardless of the cover manufacturer. Easily installed, Retro-Grate™   changes a potentially hazardous access cover opening into a safe and secure surrounding. ( Fig. 1 )



How it works

Each and every time an access cover is opened, the possibility of a fall-through accident exists. Retro-Grate™   eliminates the hazard by covering the opening with a hinged grating panel. When access to the opening is required, the safety colour orange powder coated grating panel hinges up and out of the way. Once the work is complete, simply release the latch and lower Retro-Grate™  back into position. The next operator to open the access cover is protected.

Retro-Grate™  is easy to install and allows for minor maintenance and adjustments beneath the access cover without exposing the operator to an uncovered opening. Retro-Grate™  provides additional security against unauthorised entry with the use of an owner supplied padlock and allows for single person inspections.

Standard Features
  • Custom fit to most openings regardless of cover manufacturer
  • Allows for safer inspections and perfomances of minor maintenance
  • Provides secondary locking against unauthorised entry with the use of an owner supplied padlock
  • Spring loaded lifting handle for easy access
  • Reduces potential liability issues
  • Automatic T-316 stainless steel hold open arm with aluminium latch
  • T-316 stainless steel hardware including mounting hardware
  • Aluminium construction with safety colour orange powder coating
  • Load rated at 300lbs per square foot
  • Easy to install without pit entry

designed by SmallWebs.ie